Components Location 1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E-Module5. Line pressure control solenoid valve6. Damper clutch control solenoid valve7.
Description Automatic transmission system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values.
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, replace it with a genuine blower motor check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it.