Hyundai Genesis (DH): Automatic Transmission Control System / ON/OFF Solenoid Valve Specifications

Hyundai Genesis (DH) 2013-2016 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / ON/OFF Solenoid Valve Specifications

Specifications
ON/OFF Solenoid Valve
? Control type : Normal low type
Control pressure kpa (kgf/cm?, psi)
539.36
(5.5, 78.23)
 Internal resistance(?)
10~11

    Description ON/OFF solenoid valve is attached to the valve body and used to change gears.

    Circuit Diagram

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: PGS Unit (Back & Blinde Unit) Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Glove Box") 3. Remove the PGS unit (A) after loosening the nuts. Installation 1. Install the PGS unit. 2. Install the glove box housing.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor oil Repair procedures

    Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the compressor model.

    Categories

     
    Copyright В© 2025 www.hgenesisdh.com - 0.0239