Hyundai Genesis: Automatic Transmission Control System / Output Speed Sensor Specifications

Specifications
? Type: Hall Effect Sensor
? Specifications
Operation condition (°C)°F
(-40~150) -40~302
Air gap(mm)in.
1.3(0.0512)
Output voltage
High
1.4
Low
0.7

Output Speed Sensor Description and Operation
Description The output speed sensor is a vital unit that measures the rate of rotation of the transmission's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor pr ...

Output Speed Sensor Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Manifold Repair procedures


Removal and Installation 1. Remove the surge tank. (Refer to Intake and Exhaust System - "Surge Tank") 2. Remove the breather pipe & hose (A). Tightening torque : 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft) 3. Remove the water hose (C) and pipe (A) and then remove th ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Side Impact Sensor (SIS) Repair procedures


Removal     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s). • Do not turn the ignition switch ON and ...

© 2013-2024 www.hgenesisdh.com