Hyundai Genesis: Automatic Transmission Control System / 27 Brake Control Solenoid Valve Specifications

Specifications
Direct control VFS[27/B]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)
0~1569.06
(0~16,0~227.57)
Current value(mA)
0~1100
 Internal resistance(?)
5.0~5.6

27 Brake Control Solenoid Valve Description and Operation
Description 27 Brake control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 27 Brake. ...

27 Brake Control Solenoid Valve Schematic Diagrams
Circuit Diagram ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Front Door Latch Repair procedures


Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. To remove the front door outside handle base connector (A), widen both sides of the wiring fastener (A) and then push back the front door outside handle base connector. 3. Loosen the front d ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Crankshaft Position Sensor (CKPS) Description and Operation


Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed on the cylinder block or the ...

© 2013-2024 www.hgenesisdh.com