Components Location 1. Input speed sensor2. Middle speed sensor3. Output speed sensor4. E-Module5. Line pressure control solenoid valve6. Damper clutch control solenoid valve7.
Description Automatic transmission system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values.
Inspection 1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check that the aim of the head lamp changes smoothly when the head lamp leveling device switch is turned on. 4. If it does not operate well, check the connector and terminals to make sure that they are connected.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.