Hyundai Genesis (DH): Automatic Transmission Control System / ON/OFF Solenoid Valve Description and Operation

Description
ON/OFF solenoid valve is attached to the valve body and used to change gears.

    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between solenoid valve terminals. 4.

    Specifications ON/OFF Solenoid Valve ? Control type : Normal low type Control pressure kpa (kgf/cm?, psi)539.36(5.5, 78.23) Internal resistance(?)10~11

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Repair procedures

    Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.

    Hyundai Genesis (DH) 2013-2016 Service Manual: CO2 Sensor Description and Operation

    Description This system maintains the density of carbon dioxide constantly in vehicle interior by measuring the amount of carbon dioxide to increase the comfortableness and the fuel consumption rate when air conditioning system is operating.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0245