| Description |
| |
Components Location [Vehicle Components] 1. Transmission Control Module(TCM)2. Injector Driver Box(IDB)3. Engine Control Module(ECM)4. Shift lever5.
1. TCM Connector and Terminal Function 2. TCM Terminal Function Connector PinDescriptionPinDescription1Battery power48-2Battery power49-3Power(IG 1)5027 Brake control solenoid valve4Ground51-5Ground52ON/OFF solenoid valve6Ground53-7-54Input speed sensor signal8-55Middle speed sensor signal9-56Output speed sensor signal10-57-11-58-12-59-13Inhibitor switch signal "S1"60-14Oil temperature sensor (+)61Sports mode select switch15-62-16Sports mode up switch63-17Sports mode down switch64-18-65CAN communication line (LOW)19-66-20-67-21Inhibitor switch signal "S2"68-22Inhibitor switch signal "S4"69-23Inhibitor switch signal "S3"70Solenoid supply power 224-71-25-72-26-73Solenoid supply power(4&OD/C,35R/C,6/C,L/P)27-74-28-75-29Solenoid supply power(UD/C,27/B,8LR/B,D/C)76-30Input speed sensor power77-31Middle speed sensor power78-32-79-33-80-34-81-35-82-36-83-37-84-38Oil temperature sensor (-)85CCP CAN Low39-86CCP CAN High40-87CAN communication line (High)4135R Clutch control solenoid valve88-428LR Brake control solenoid valve 89-43Underdrive clutch control solenoid valve90-446Speed clutch control solenoid valve91-45Line pressure control solenoid valve92-46Damper clutch control solenoid valve93Output speed sensor power474&OD Clutch control solenoid valve94- 3.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the console temperature control actuator connector. 3. Verify that the console temperature control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.
Replacement 1. Remove both stoppers (B) by turning them from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. Remove the filter cover (A) by pressing the knob. 4. Replace the air filter (A) with a new one according to the direction of air filter.