Hyundai Genesis (DH): Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Hyundai Genesis (DH) 2013-2016 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
| Specifications |
Direct control VFS[UD/C]
? Control type : Normal low type
| Control Pressure kpa (kgf/cm?, psi) | 0~1569.06 (0~16,0~227.57) |
| Current value(mA) | 0~1100 |
| Internal resistance(?) | 5.0~5.6 |
Description UD Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the UD Clutch.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Description and Operation
D
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Body Electrical System
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
Copyright В© 2026 www.hgenesisdh.com - 0.0233