| Removal |
| 1. |
Disconnect the negative(-) battery terminal. |
| 2. |
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
| 3. |
Remove the start/stop button (A) from the center fascia garnish after loosening the mounting clip.
|
| 4. |
Disconnect the start/stop button connector. |
| Installation |
| 1. |
Install the start/stop button. |
| 2. |
Install the crash pad lower panel. |
| 3. |
Connect the negative (-) battery terminal. |
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the head up display bezel (A). 3. Remove the instrument cluster. (Refer to Indicators And Guages - "Instrument Cluster") 4. Remove the head up display unit bracket (A) after loosening the mounting nuts.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the warm (Driver's side) or cool (Passenger's side) position when connecting 12V to terminal 3 and grounding terminal 4.