Hyundai Genesis (DH): Automatic Transmission Control System / 4&OD Clutch Control Solenoid Valve Specifications

Hyundai Genesis (DH) 2013-2016 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / 4&OD Clutch Control Solenoid Valve Specifications

Specifications

Direct control VFS[4&OD/C]

? Control type : Normal high type

Control Pressure kpa (kgf/cm?, psi)	0~1569.06 (0~16,0~227.57)
Current value(mA)	0~1100
Internal resistance(?)	5.0~5.6

❮4&OD Clutch Control Solenoid Valve Description and Operation

Description 4&OD Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 4&OD Clutch.

4&OD Clutch Control Solenoid Valve Schematic Diagrams❯

Circuit Diagram

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts. Take care not to separate the bracket from rear bumper when removing the BSD sensor.

Hyundai Genesis (DH): Automatic Transmission Control System / 4&OD Clutch Control Solenoid Valve Specifications

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Components and Components Location

Categories