Hyundai Genesis (DH): Automatic Transmission Control System / Transmission Oil Temperature Sensor Description and Operation

Hyundai Genesis (DH) 2013-2016 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Transmission Oil Temperature Sensor Description and Operation

Description
Transmission oil temperature sensor monitors the automatic Transmission fluid's temperature and conveys the readings to TCM.
It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to perform hydraulic amendment control during gear changes.

    Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the cover (A). 3. Disconnect the ECM connector (A), TCM connector (B) and IDB connector (C).

    Specifications ? Type: Negative Thermal Coefficient Type Temp.[(

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor. (Refer to Windshield Wiper/Washer - "Rain Sensor") Installation 1. Install the auto light sensor. 2. Connect the negative (-) battery terminal.

    Hyundai Genesis (DH) 2013-2016 Service Manual: PGS Unit (Back & Blinde Unit) Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Glove Box") 3. Remove the PGS unit (A) after loosening the nuts. Installation 1. Install the PGS unit. 2. Install the glove box housing.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0265