| Inspection |
| 1. |
Check signal waveform of Input speed sensor using the GDS.
|
Circuit Diagram
Description Middle speed sensor is a vital unit that measures the direction of rotation of the input shaft inside the transmission and delivers the readings to the TCM.
Description BSD is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm (visual and auditory).
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.