Hyundai Genesis (DH): Heating, Ventilation and Air Conditioning / Air Conditioning System
- General Safety Information and Caution
- Description and Operation
- Repair procedures
- Components and Components Location
- Compressor oil Repair procedures
- Refrigerant Line Repair procedures
- Compressor Description and Operation
- Compressor Components and Components Location
- Compressor Repair procedures
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- A/C Pressure Transducer Description and Operation
- A/C Pressure Transducer Repair procedures
- Evaporator Temperature Sensor Description and Operation
- Evaporator Temperature Sensor Repair procedures
- In-car Sensor Description and Operation
- In-car Sensor Repair procedures
- Photo Sensor Description and Operation
- Photo Sensor Repair procedures
- Ambient Temperature Sensor Description and Operation
- Ambient Temperature Sensor Repair procedures
- CO2 Sensor Description and Operation
- CO2 Sensor Schematic Diagrams
- CO2 Sensor Repair procedures
- Auto Defogging Sensor Description and Operation
- Auto Defogging Sensor Repair procedures
- Cluster Ionizer Description and Operation
- Cluster Ionizer Repair procedures
Troubleshooting Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor.
Instructions When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Description and Operation
Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low-pressure and low-temperature refrigerant gas into high-pressure and high-temperature refrigerant gas.
Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Brake System
- Body Electrical System
- Active Air Flap(AAF) Repair procedures
- New on site
- Most important about car
