Hyundai Genesis (DH): Air Conditioning System / In-car Sensor Repair procedures
| Inspection |
| 1. |
Turn the ignition switch ON. |
| 2. |
Blow warm air into the in-car sensor air inlet. Measure the sensor resistance between 1 and 3 terminals.
Specification
Description An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the cabin. Description The photo sensor is located in the right side of the inside rearview mirror. he integrated rain sensor is located in the right side of the inside rearview mirror. Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Head Lamp Leveling Unit Repair proceduresInspection 1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check that the aim of the head lamp changes smoothly when the head lamp leveling device switch is turned on. 4. If it does not operate well, check the connector and terminals to make sure that they are connected. Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Sensor Description and OperationDescription The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0207
|
