Hyundai Genesis (DH): Brake System / ESC(Electronic Stability Control) System
- Components and Components Location
- Description and Operation
- Schematic Diagrams
- Troubleshooting
- EBD(Electronic Brake-force Distribution) Description and Operation
- ESC Control Unit Repair procedures
- Emergency Signal System Description and Operation
- Front Wheel Speed Sensor Components and Components Location
- Front Wheel Speed Sensor Repair procedures
- Rear Wheel Speed Sensor Components and Components Location
- Rear Wheel Speed Sensor Repair procedures
- ESC OFF Switch Description and Operation
- ESC OFF Switch Repair procedures
- Steering Angle Sensor Description and Operation
- Steering Angle Sensor Repair procedures
Removal 1. Turn ignition switch off and disconnect the battery (-) cable from the battery 2. Remove the driver side crash pad side cover. (Refer to Body - "Crash Pad") 3.
Components 1. HECU module2. Steering angle sensor (SAS)3. Rear wheel speed sensor4. Front wheel speed sensor
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: LKAS Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror wiring cover (A) and rain sensor cover (B). 3. Remove the LKAS unit connector (A). 4. Remove the LKAS unit after disengaging the mounting bracket (A). Installation 1.
Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor oil Repair procedures
Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the compressor model.
Categories
- Manuals Home
- Kia Cadenza Owners Manual
- Kia Cadenza Service Manual
- Warning And Caution Labels
- Sunvisor Components and Components Location
- Towing
- New on site
- Most important about car
