Hyundai Genesis (DH): ESC(Electronic Stability Control) System / ESC OFF Switch Description and Operation
| Description |
| 1. |
The ESC OFF switch is for the user to turn off the ESC system. |
| 2. |
The ESP OFF lamp is on when ESP OFF switch is engaged. |
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 88.
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side cover. (Refer to Body - "Crash Pad") 3.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.
Hyundai Genesis (DH) 2013-2016 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If they are clogged, clean them with water, and blow them with compressed air. If they are bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Front Door
- ECS-G Sensor Repair procedures
- Engine Mechanical System
- New on site
- Most important about car
