Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim") 3. Remove the panorama sunroof motor (A) after loosening the screws and disconnecting the connector.
Specification ItemBulb TypeBulb Wattage (W)FrontHead lamp (Halogen)LowH1155HighHB360Head lamp (HID)LowD1S35HighBI-Function-Front turn signal lampLED / PY28WLED / 28Position lampLEDLEDFront fog lampLEDLEDDoor mirror turn signal lampLEDLEDRearHigh mounted stop lampLEDLEDTurn signal lamp28/8W NA / LED28 / LEDRear stop/tail lamp (Outside)LEDLEDRear stop/tail lamp (Inside)LEDLEDBack up lampW16W / LED16 / LEDLicense plate lampLEDLEDInteriorLuggage lampLEDLEDMap LampLEDLEDRoom LampLEDLEDVanity LampLEDLED
Description System Overview The System offers the following features: - Changing the state of engine ignition and power by using the start button. - Controlling external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical ignition switch.
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and fall with lower intensive light.