Hyundai Genesis (DH): Lighting System / Hazard Lamp Switch Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch Repair procedures

Inspection
1.
Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.

No.
Description
1
BAT (+)
2
Illumination (+)
3
-
4
Signal
5
Pilot lamp
6
-
7
Illumination (-)
8
GND

Removal
   

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the door mood lamp connectors (A).

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Indicator Components and Components Location

    C

    Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair procedures

    Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0277