Hyundai Genesis (DH): Lighting System / Specifications

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / Lighting System / Specifications

Specification
Item
Bulb Type
Bulb Wattage (W)
Front
Head lamp (Halogen)
Low
H11
55
High
HB3
60
Head lamp (HID)
Low
D1S
35
High
BI-Function
-
Front turn signal lamp
LED / PY28W
LED / 28
Position lamp
LED
LED
Front fog lamp
LED
LED
Door mirror turn signal lamp
LED
LED
Rear
High mounted stop lamp
LED
LED
Turn signal lamp
28/8W NA / LED
28 / LED
Rear stop/tail lamp (Outside)
LED
LED
Rear stop/tail lamp (Inside)
LED
LED
Back up lamp
W16W / LED
16 / LED
License plate lamp
LED
LED
Interior
Luggage lamp
LED
LED
Map Lamp
LED
LED
Room Lamp
LED
LED
Vanity Lamp
LED
LED

    Component Location 1. Head lamp (Low/)2. Head lamp (High)3. Head lamp (BI-FUNCTION)4.Turn signal lamp5. Side marker lamp6. Position lamp (USA only) Position lamp & DRL7.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Switch Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after connecting the connector.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Ambient Temperature Sensor Description and Operation

    Description The ambient temperature sensor is located inside the side mirror and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperature control, temperature regulation door control,

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0251