Hyundai Genesis (DH): Engine Mechanical System / Intake And Exhaust System
- Air Cleaner Components and Components Location
- Air Cleaner Repair procedures
- Variable Intake Solenoid(VIS) Actuator Repair procedures
- Surge Tank Components and Components Location
- Surge Tank Repair procedures
- Intake Manifold Components and Components Location
- Intake Manifold Repair procedures
- Exhaust Manifold Components and Components Location
- Exhaust Manifold Repair procedures
- Muffler Components and Components Location
- Muffler Repair procedures
Removal and Installation 1. Disconnect the battery "-" terminal from the trunk room. 2. Remove the engine room under cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 3.
Components 1. Air cleaner cover2. Air cleaner element3. Air cleaner body4. Air intake hose5. Resonator6. Intake air temperature sensor (IATS)
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Parking Assist Sensor Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (B) from the parking assist sensor (A).
Hyundai Genesis (DH) 2013-2016 Service Manual: Components and Components Location
Component Location Index Engine Room [Lambda Engine] 1. Expansion Valve2. Suction & Liquid Tube Assembly3. Service Port (Low Pressure)4. Service Port (High Pressure)5. A/C Pressure Transducer (APT)6. Compressor7. Condenser8. Receiver-drier [Tau Engine] 1.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Body (Interior and Exterior)
- Troubleshooting
- Rain Sensor Components and Components Location
- New on site
- Most important about car
