Hyundai Genesis (DH): Intake And Exhaust System / Intake Manifold Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold Repair procedures

Removal and Installation
1.
Remove the surge tank.
(Refer to Intake and Exhaust System - "Surge Tank")
2.
Remove the breather pipe & hose (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

3.
Remove the water hose (C) and pipe (A) and then remove the intake manifold (B).

   

    Components 1. LH Gasket2. LH Exhaust manifold3. RH Exhaust manifold stay4. RH Gasket5. RH Exhaust manifold6. RH Exhaust manifold stay

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Head Lamp Leveling Unit Troubleshooting

    Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor oil Repair procedures

    Oil Specification 1. The HFC-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2. Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the compressor model.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0261