Inspection 1. Fuse inspection Install the test fuse to the switch fuse and relay fuse part in order to confirm a normal joint fit. 2. Inspection of connector by each part Check whether each connector is damaged, or there is terminal surge or incomplete connection.
Components 1. Parking brake pedal2. Front parking brake cable3. Equalizer assembly4. Rear parking brake cable Components Location 1. Backing plate2.
C
Inspection 1. Check the condenser fins for clogging and damage. If they are clogged, clean them with water, and blow them with compressed air. If they are bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.