Hyundai Genesis (DH): Body Electrical System / Blind Spot Detection system
- Specifications
- Components and Components Location
- Description and Operation
- Repair procedures
- Blind Spot Detection Unit Schematic Diagrams
- Blind Spot Detection Unit Repair procedures
- Blind Spot Detection Switch Components and Components Location
- Blind Spot Detection Switch Repair procedures
- Blind Spot Detection Indicator Components and Components Location
- Blind Spot Detection Indicator Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror wiring cover (A) and rain sensor cover (B). 3. Remove the LKAS unit connector (A).
Specifications ItemsSpecificationRated voltageDC 12VOperating voltage9V ~ 16VOperating speed15?/h ~ 250?/hSensible distance70m (Sedan)Curvature radiusStart : More than 100mStop : Less than 70mFrequency24 GHzNumbers2EA (Master 1EA, Slave 1EA)
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Blind Spot Detection Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Restraint
- Electric Parking Brake (EPB) Repair procedures
- Brake System
- New on site
- Most important about car
