Hyundai Genesis (DH): Suspension System / Tire Pressure Monitoring System
- Components and Components Location
- Description and Operation
- TPMS Sensor Description and Operation
- TPMS Sensor Repair procedures
- TPMS Receiver Description and Operation
- TPMS Receiver Schematic Diagrams
- TPMS Receiver Repair procedures
Replacement Front 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub.
Components 1. Receiver2. TPMS Sensor (FL) 3. TPMS Sensor (RL) 4. TPMS Sensor (RR)5. TPMS Sensor (FR)
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Sensor Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- General Information
- Active Air Flap(AAF) Repair procedures
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- New on site
- Most important about car
