Hyundai Genesis (DH): Engine Electrical System / Smart Cruise Control System
- General Safety Information and Caution
- Schematic Diagrams
- Description and Operation
- Smart Cruise Control Unit Description and Operation
- Smart Cruise Control Unit Specifications
- Smart Cruise Control Unit Schematic Diagrams
- Smart Cruise Control Unit Repair procedures
- Smart Cruise Control Switch Components and Components Location
- Smart Cruise Control Switch Schematic Diagrams
- Smart Cruise Control Switch Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air-bag module from the steering wheel. (Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") 3.
General Safety Information and Caution Be careful of the following precautions when driving the vehicle using the smart cruise control system.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: In-car Sensor Description and Operation
Description An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the cabin. The signal determined by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signa
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Engine Electrical System
- Active Air Flap(AAF) Repair procedures
- Emission Control System
- New on site
- Most important about car
