Hyundai Genesis (DH): Smart Cruise Control System / Smart Cruise Control Unit Description and Operation
Hyundai Genesis (DH) 2013-2016 Service Manual / Engine Electrical System / Smart Cruise Control System / Smart Cruise Control Unit Description and Operation
| Description |
The smart cruise control unit is installed on the front right
side of the chassis.A radar sensor is embedded in the front section of
the unit. This sensor detects vehicles and objects in front of the
vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle.
The alarm goes off when the vehicle deviates from the horizontal and
vertical alignment reference points during operation. This sensor
communicates with the dashboard, warning buzzer, smart cruise control
switch, Electronic Stability Program (ESP), ECM, and TCM via CAN
communication.The sensor controls vehicle speed through CAN
communication between the Electronic Stability Program (ESP) system and
the ECM and TCM.
Description The smart cruise control system allows a driver to program the vehicle to control the speed and following distance by detecting the vehicle ahead without depressing the brake pedal and the accelerator pedal.
Specification ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Components and Components Location
C
Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures
Diagnosis With GDS 1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. Connect the cable of GDS to the data link connector in driver side crash pad lower panel, and turn on the GDS.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- AWD ECU Flow Diagram
- Front Seat Back Cover Repair procedures
- Components and Components Location
- New on site
- Most important about car
Copyright © 2025 www.hgenesisdh.com - 0.0259