Hyundai Genesis (DH): Automatic Transmission System (SBC) / Automatic Transmission System
- Repair procedures
- Automatic Transmission Components and Components Location
- Automatic Transmission Repair procedures
Special Service Tools Tools (Number and name)IllustrationUse09480-A3800Inhibitor neutral fixed pinUsed to align the neutral position when installing the manual control lever on the inhibitor switch.
End Of Line(EOL) Input When shift shock occurs or transmission-related parts are replaced, End Of Line(EOL) should be performed.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier.
Hyundai Genesis (DH) 2013-2016 Service Manual: Blower Unit Components and Components Location
Component Location Components 1. Seal2. Intake Duct Case3. Intake Door4. Intake Actuator5. Intake Duct Case (A)6. Climate Control Air Filter7. Climate Control Air Filter Cover8. Cluster Ionizer9. Blower Upper Case10. Blower Lower Case11. Power Mosfet12.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Rain Sensor Repair procedures
- Restraint
- Body Electrical System
- New on site
- Most important about car
