Hyundai Genesis (DH): General Information / Special Service Tools
| Special Service Tools |
| Tools (Number and name) | Illustration | Use |
| 09480-A3800 Inhibitor neutral fixed pin |
| Used to align the neutral position when installing the manual control lever on the inhibitor switch. |
Specifications ItemSpecificationsTransmission typeA8LR1Engine modelGasoline 3.8GDI (SBC)Torque converter type3-element, 1-stage, 2-phase typeOil pump systemInternal gear typeFriction elementsClutch: 4EABrake: 2EAOWC : 1EAPlanetary gear 3EAGear ratio1st3.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Sensor Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Active Air Flap(AAF) Repair procedures
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Electric Parking Brake (EPB) Repair procedures
- New on site
- Most important about car
