Hyundai Genesis (DH): Steering System / Steering wheel
- Components and Components Location
- Repair procedures
- Heated Steering wheel Components and Components Location
- Heated Steering wheel Description and Operation
- Heated Steering wheel Schematic Diagrams
- Heated Steering wheel Repair procedures
Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels are placed in the straight ahead position 2.
Components 1. Airbag module2. Remote control switch3. Steering wheel4. Wiring5. Lower cover
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Ambient Temperature Sensor Description and Operation
Description The ambient temperature sensor is located inside the side mirror and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperature control, temperature regulation door control,
Hyundai Genesis (DH) 2013-2016 Service Manual: Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4. Verify that the mode control actuator operates to the vent mode when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Body (Interior and Exterior)
- Starter Repair procedures
- Description and Operation
- New on site
- Most important about car
