Hyundai Genesis: Steering wheel / Heated Steering wheel Repair procedures

Inspection

1.	Measure the resistance between the NTC and heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 k? ± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.0 ~ 1.8 ? ± 10%

2.	Measure a temperature. A. The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minutes. B. The temperature of the wheel surface grip must remain at 38°C ± 4°C after 25 minutes. C. Every measuring spots (1-8).

Heated Steering wheel Schematic Diagrams

Circuit Diagram 1. Connector terminal 2. Circuit Diagram ...

Motor Driven Power Steering

...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Transfer Fluid Repair procedures

Inspection     Prohibition on checking, refilling and replacing the transfer case oil - Do not check, refill and replace the transfer case oil because the oil for the transfer case only (ultra-low viscosity of ATF SHELL TF 0870) is filled when coming out of the factory. ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Console Armrest Repair procedures

Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • When removing the interior trim pieces, use a p ...