Hyundai Genesis (DH): Brake System / Autonomous Emergency Braking(AEB) System
Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of an absolute angle type (CAN type) measures the angle under the standard of the zero angle set.
Description AEB(Autonomous Emergency Braking) is a function purposed to avoid the collision or to reduce the damage against the accident which can be taken place from the late braking or insufficient braking power due to the reason of absented mind of the driver.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower crash pad switch assembly (A) after disengaging the mounting clip. 4. Remove the rheostat switch connector (A).
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Body Electrical System
- Brake System
- Restraint
- New on site
- Most important about car
