| Components |

Description AEB(Autonomous Emergency Braking) is a function purposed to avoid the collision or to reduce the damage against the accident which can be taken place from the late braking or insufficient braking power due to the reason of absented mind of the driver.
Driver settings AEB function ON/OFF switch is included in USM (User Setting Menu) and the state when being released from factory is ON. With the IGN ON, the ON condition is maintained by default and the drivers
Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace any faulty tubes or hoses. Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten the bolt or nut joint to the specified torque.
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.