Inspection Inspect Flexible Coupling 1. Check the front and rear flexible couplings for cracks or damage. 2. Inspect the flexible coupling centering bushing.
Components Location 1. Front propeller shaft2. Transfer case3.Front differential assembly Components 1. Pinion lock nut 2. Companion flange 3.
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and fall with lower intensive light.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.