| Adjustment |
Components 1. Rear door inside handle cap2. Rear door pull cap3. Rear door trim4. Rear door frame inner cover 5. Rear door module6. Rear door latch assembly7. Component Location 1. Rear door trim Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: Receiver-Drier Repair proceduresReplacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with the L wrench (A). Tightening torque : 9.81 ~ 14.71 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 3. Remove the receiver-drier (A) from condenser using a long nose plier. Hyundai Genesis (DH) 2013-2016 Service Manual: Blower Motor Repair proceduresInspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, replace it with a genuine blower motor check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it. Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0333
|