Hyundai Genesis (DH): Automatic Transmission System (SBC) / Hydraulic System
- Description and Operation
- Components and Components Location
- Oil Pump Description and Operation
- Oil Pump Components and Components Location
- Fluid Components and Components Location
- Fluid Repair procedures
- Oil Filter Repair procedures
- Valve Body Description and Operation
- Valve Body Components and Components Location
Removal 1. Draining the coolant. (Refer to Engine Mechanical System - "Coolant") 2. Remove the exhaust manifold. (Engine Mechanical System - "Exhaust Manifold") 3.
Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower crash pad switch assembly (A) after disengaging the mounting clip. 4. Remove the rheostat switch connector (A).
Hyundai Genesis (DH) 2013-2016 Service Manual: Refrigerant Line Repair procedures
Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace any faulty tubes or hoses. Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten the bolt or nut joint to the specified torque.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Evaporative Emission Control System
- General Information
- Starter Repair procedures
- New on site
- Most important about car
