Hyundai Genesis (DH): Hydraulic System / Oil Pump Components and Components Location
| Components Location |
| 1. Oil seal 2. Reaction shaft 3. Housing 4. Cover 5. O-Ring | 6. Reaction shaft 7. Snap ring 8. Needle bearing 9. 8LR/B return spring 10. 8LR/B piston |
Description The oil pump rotation generates the hydraulic pressure needed for the lubrication of various parts of the automatic transmission and operation of the clutch and brakes.
Components Location 1. Oil injection hole2. Oil level check plug3. Oil drain plug
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Front Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove the front fog lamp assembly (A) after loosening the mounting nut.
Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Remove the engine room cover.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- ECS-G Sensor Repair procedures
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Emission Control System
- New on site
- Most important about car
