Hyundai Genesis (DH): Body Electrical System / Hands Free System
- Components and Components Location
- Hands Free Switch Schematic Diagrams
- Hands Free Switch Repair procedures
- Hands Free Mic Repair procedures
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor.
Components 1. Hands free call switch2. Overhead console (Mic)3. Front left speaker4. Front right speaker5. Audio head unit (hands free control) ? There is no hands free jack.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Head Lamp Leveling Unit Troubleshooting
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t
Hyundai Genesis (DH) 2013-2016 Service Manual: Photo Sensor Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and fall with lower intensive light.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Engine Mechanical System
- Engine Coolant Temperature Sensor (ECTS) Repair procedures
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
