| Inspection |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the overhead console. |
| 3. |
Remove the handsfree mic (B) after disconnecting the handsfree mic connector (A).
|
| 4. |
Check the continuity of the Mic between terminals using an ohmmeter.
|
Inspection 1. Check for resistance between terminals in each switch position(LH). [Audio] SwitchConnectorterminalResistance(
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") 3. Remove the BSD unit (A) after loosening the mounting nuts. Take care not to separate the bracket from rear bumper when removing the BSD sensor.
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,