Hyundai Genesis (DH): Transfer Assembly / Front Axle Flange Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / 4 Wheel Drive (AWD) System / Transfer Assembly / Front Axle Flange Repair procedures

Removal
   
Use caution when handling the transfer case.
Preventing the ITA (Integrated Transfer case Actuator ) from damage
1) In case of transporting the transfer case

    Inspection     Prohibition on checking, refilling and replacing the transfer case oil - Do not check, refill and replace the transfer case oil because the oil for the transfer case only (ultra-low viscosity of ATF SHELL TF 0870) is filled when coming out of the factory.

    Removal     Use caution when handling the transfer case. Preventing the ITA (Integrated Transfer case Actuator) from damage 1) In case of transporting the transfer case

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Front Fog Lamps Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect the front fog lamp connector (A). 4. Remove the front fog lamp assembly (A) after loosening the mounting nut.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Mode Control Actuator Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4. Verify that the mode control actuator operates to the vent mode when connected in reverse.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0204