Hyundai Genesis (DH): Transfer Assembly / Rear Axle Flange Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / 4 Wheel Drive (AWD) System / Transfer Assembly / Rear Axle Flange Repair procedures

Removal
   
Use caution when handling the transfer case.
Preventing the ITA (Integrated Transfer case Actuator) from damage
1) In case of transporting the transfer case

    Removal     Use caution when handling the transfer case. Preventing the ITA (Integrated Transfer case Actuator ) from damage 1) In case of transporting the transfer case

    Removal     Use caution when handling the transfer case. Preventing the ITA (Integrated Transfer case Actuator) from damage 1) In case of transporting the transfer case

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Compressor Description and Operation

    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low-pressure and low-temperature refrigerant gas into high-pressure and high-temperature refrigerant gas.

    Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0272