Hyundai Genesis (DH): Engine Control System / Crankshaft Position Sensor (CKPS) Repair procedures
| Inspection |
| 1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
Circuit Diagram Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect. Other information:Hyundai Genesis (DH) 2013-2016 Service Manual: A/C Pressure Transducer Description and OperationDescription The A/C Pressure Transducer (APT) converts the pressure value of high-pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it at high speed or low speed. Hyundai Genesis (DH) 2013-2016 Service Manual: Console Temperature Control Actuator Repair proceduresInspection 1. Turn the ignition switch OFF. 2. Disconnect the console temperature control actuator connector. 3. Verify that the console temperature control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4. Categories
Copyright В© 2026 www.hgenesisdh.com - 0.0236
|