Hyundai Genesis (DH): Front / Rear Parking Assist System / Specifications
| Specification |
| Item | Specification |
| Ultrasonic sensor | Voltage rating | DC 12 V |
| Detecting range | 40 cm ~ 120 cm |
| Operation voltage | DC 9 ~ 16 V |
| Operation current | MAX 300 mA |
| Operation temperature | -30 |
Component Location 1. BCM (Body Control Module)2. Ultrasonic sensor Rear parking assist control unit function is built in BCM (body control unit).
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: A/C Pressure Transducer Description and Operation
Description The A/C Pressure Transducer (APT) converts the pressure value of high-pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it at high speed or low speed.
Hyundai Genesis (DH) 2013-2016 Service Manual: Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Rain Sensor Repair procedures
- Body (Interior and Exterior)
- Engine Mechanical System
- New on site
- Most important about car
Copyright В© 2026 www.hgenesisdh.com - 0.0291