Hyundai Genesis (DH): 4 Wheel Drive (AWD) System / AWD Control System
- AWD ECU Components and Components Location
- AWD ECU Description and Operation
- AWD ECU Flow Diagram
- AWD ECU Schematic Diagrams
- AWD ECU Repair procedures
Removal Use caution when handling the transfer case. Preventing the ITA (Integrated Transfer case Actuator) from damage 1) In case of transporting the transfer case
Components Location ITA (Integrated Transfer case Actuator) The ITA is a unit integrated with the AWD ECU and motor, and the AWD ECU variably controls the magnitude of the driving force delivered to the front wheel by determining the driving condition from the various input signals.
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: PGS Unit (Back & Blinde Unit) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to Body - "Glove Box") 3. Remove the PGS unit (A) after loosening the nuts. Installation 1. Install the PGS unit. 2. Install the glove box housing.
Hyundai Genesis (DH) 2013-2016 Service Manual: Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If they are clogged, clean them with water, and blow them with compressed air. If they are bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required.
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Electric Parking Brake (EPB) Repair procedures
- Body (Interior and Exterior)
- Starter Repair procedures
- New on site
- Most important about car
