Hyundai Genesis: Hood / Hood Latch Release Handle Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement
1.
After loosening the mounting screw, remove the hood latch release handle (A).

2.
Install in the reverse order of removal.
   
Make sure the hood latch cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
Hood Latch Release Handle Components and Components Location
Component Location 1. Hood latch release handle ...

Hood Latch Components and Components Location
Component Location 1. Hood latch assembly ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Repair procedures


Adjustment Inspect Glass Alignment 1. Check the alignment of the movable glass (C) located between the front (A) and rear (B) glass and adjust it if necessary. Alignment adjustment Standard value [mm(in.)] (1) Front edge : 0 mm (0 in.) (2) Rear edge : 0 mm (0 in.) 2. Completely open ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Fuel Pressure Sensor (FPS) Description and Operation


Description The fuel pressure sensor (FPS) is installed on top of the low pressure fuel pump and measures the pressure of the low pressure fuel line. Based on the current fuel pressure and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the ...

© 2013-2022 www.hgenesisdh.com