Hyundai Genesis (DH): General Information / Troubleshooting

Troubleshooting
Symptom
Cause of the symptom
Remedy
Excessive play in steering
Loose U-joint bolt
Retighten or replace as necessary
Loose yoke plug
Retighten
Loose steering gear mounting bolts
Retighten
Loose or worn tie rod end
Retighten or replace as necessary
Steering wheel does not return to its original position
Excessive turning resistance of tie rod end
Replace
Yoke plug excessively tight
Adjust
Tie rod and/or ball joint cannot turn smoothly
Replace
Loose mounting of gear box mounting bracket at the subframe
Retighten
Worn steering shaft joint and/or body grommet
Correct or replace
Distorted rack
Replace
Rattling or chucking noise in the rack and pinion
Loose steering gear box mounting
Reposition
Loose tie rod end and/or ball joint
Retighten
Worn tie rod and/or ball joint
Retighten
Loose yoke plug
Replace

    Special Service Tools Tool Name / NumberIllustrationDescription09561-11001Steering wheel pullerRemoval of steering wheel09568-2J100Ball joint pullerRemoval of ball joint

    Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels are placed in the straight ahead position 2.

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Specifications

    S

    Hyundai Genesis (DH) 2013-2016 Service Manual: In-car Sensor Description and Operation

    Description An in-car air temperature sensor is located in the crash pad lower panel. The sensor contains a thermistor which measures the temperature of the cabin. The signal determined by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signa

    Categories

     
    Copyright В© 2026 www.hgenesisdh.com - 0.0211