Hyundai Genesis (DH): Horn / Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Body Electrical System / Horn / Repair procedures

Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
After loosening each mounting bolt of the low-pitch horn (A) and high-pitch horn (B), detach the connector (C) and remove the horn.

Installation
1.
After connecting the horn connectors, install both high-pitch and low-pitch horns.
2.
Install the front bumper cover.
Inspection
1.
The relay on the horn of this vehicle is implanted into the metal core block PCB of the engine room relay block.
   
The semi-conductor type relay inserted in the PCB is impossible to replace. If the relay needs to be replaced, replace the metal core box and conduct a test on it.

    Component Location 1. Horn switch2. Horn relay (Built - in Metal Core Block PCB)3. Horn (Low pitch)4. Horn (High pitch)5. Clock spring

    Other information:

    Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Light Sensor Components and Components Location

    C

    Hyundai Genesis (DH) 2013-2016 Service Manual: Temperature Control Actuator Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the warm (Driver's side) or cool (Passenger's side) position when connecting 12V to terminal 3 and grounding terminal 4.

    Categories

     
    Copyright © 2025 www.hgenesisdh.com - 0.0288