| Inspection |


| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the rear package tray trim (A) after removing the rear seat.
(Refer to Body - "Rear Package Tray Trim")
|
| 3. |
Remove the rear curtain (A) after disconnecting the connector and rear curtain mounting nuts.
|
| Installation |
| 1. |
Install the rear curtain after connecting the connector. |
| 2. |
Install the rear package trim and rear seat. |
| 3. |
Connect the negative battery terminal. |
Description The rear curtain is AUTO UP/AUTO DOWN by one-touch operation of the switch. The curtain covers the inner side of the rear glass to keep passengers out of direct sunlight.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (B) from the parking assist sensor (A).
Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace any faulty tubes or hoses. Cap the open fittings immediately to keep moisture or dirt out of the system. 3. Tighten the bolt or nut joint to the specified torque.