| Components Location |
| Supplemental Restraint System Control Module (SRSCM) |

| Front Impact Sensor (FIS) |

| Side Impact Sensor (SIS) |

| Driver Airbag (DAB) / Passenger Airbag (PAB) / Knee Airbag (KAB) |

| Side Airbag (SAB) |

| Curtain Airbag (CAB) |

| Seat Belt Pretensioner (BPT) |

Component Replacement after Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper cover. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3. Disconnect the connector (B) from the parking assist sensor (A).
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, replace it with a genuine blower motor check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it.