| Removal |
| 1. |
Remove the Electro chromic Inside rear view mirror.
(Refer to Electro Chromic Inside Rear View Mirror) |
| Installation |
| 1. |
Install the Electro chromic Inside rear view mirror.
(Refer to Electro Chromic Inside Rear View Mirror) |
Schematic Diagrams
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The following is the summarized A/S procedure. NoProcedure1Park the vehicle on level ground2Tire check3IGN1 ON4Head lamp Low Beam ON5Connection with diagnostic tool6Initial command by diagnostic tool7Clear DTC Code8IGN1 OFF > ON9Re- Connection with diagnostic t
Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher intensive light and fall with lower intensive light.