Hyundai Genesis (DH): Automatic Transmission Cooling System / ATF Warmer Description and Operation
Hyundai Genesis (DH) 2013-2016 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Cooling System / ATF Warmer Description and Operation
| Description |
The ATF warmer is mounted on the transmission to reduce oil
viscosity frictionby increasing the temperature of oil in cold state,
which in turn improves fuel efficiency It is mounted on the entry of the
Electronic Throttle Controller (ETC) in series, as shown in the
diagram, and minimizes the effects of cabin heating system.
| |
Component Location 1. ATF Warmer2. Transmission3. Transfer case(AWD)
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Components and Components Location
Component Location Index Engine Room [Lambda Engine] 1. Expansion Valve2. Suction & Liquid Tube Assembly3. Service Port (Low Pressure)4. Service Port (High Pressure)5. A/C Pressure Transducer (APT)6. Compressor7. Condenser8. Receiver-drier [Tau Engine] 1.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Actuator Description and Operation
Description The auto defogging sensor is installed on front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives a signal from the sensor and restrains moisture and eliminates defog by the intake actuator, A/C, auto defogging actuator, blower motor
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Body Electrical System
- Engine Mechanical System
- General Information
- New on site
- Most important about car
Copyright В© 2026 www.hgenesisdh.com - 0.0219